Optimal air humidity in
production facilities
40-60%
NATURAL.
HYGIENIC.
HEALTHY.
Comfort zone 40-60 %
Optimal air humidity in production facilities.
If one enthuses about a "good climate" in the company, this usually describes the mood and the human contact of the employees with each other. But the appreciation that a company shows its employees also makes a decisive contribution to a "good climate". In addition to the ethical obligation, it is therefore also an economic decision to protect the health of the employees in the best possible way and thus promote their productivity and general well-being. After all, employees make a decisive contribution to the success of a company with their know-how and commitment.
Scientific findings show that the indoor climate has a major influence on the health, well-being and performance of employees. The comfort zone of a person lies between 40 and 60 % in relation to the relative humidity (RH). Between these two values, people feel comfortable, perform well and stay healthy.
Health aspect
Best function of our natural protection
Optimal working conditions for the mucous membranes in nose and mouth. These protect the employees against the penetration of particles, bacteria and viruses into their airways.
Transmission rate of viruses drops
The transmission rate of viruses via the air is reduced because virus particles form larger droplets at a humidity level of 40-60 % and thus sink to the ground faster.
Shorter survival time of viruses
The survival time of viruses on surfaces is reduced at an air humidity of 40-60 %. Viruses with a fat cover (e.g. corona viruses) are most unstable under these conditions.
General well-being
Better hydration
of the skin
The skin's state of hydration is in the optimal range at an air humidity of 40-60 %. Complaints such as itching and skin irritation among employees are reduced.
Lower evaporation rate of the eyes
At an air humidity of 40-60 %, significantly less moisture evaporates via the eyes. This means that the eyes of employees are better protected against dehydration.
Stress level, sleep quality, activity
A humidity level of 40-60 % leads to fewer stress symptoms and improves the conditions for physical activities of employees.
Performance
Improved concentration ability
Fewer symptoms
of fatigue
Increased
motivation
Employees who feel comfortable and enjoy good health thanks to healthy indoor air have been proven to have less signs of fatigue and are more productive. Performance increases with a healthy workplace with controlled indoor air.
The advantages for your company:
- Best health protection for employees
- Prevention of virus spread
- Dust reduction
- Increased productivity
- Reduced sick leave
A stable comfort zone 40-60 %
With heating in autumn/winter, the relative humidity decreases.
Keeping the humidity stable in our comfort zone at 40-60 % is not always easy and can only be reliably guaranteed by controlled humidification of the indoor air. Especially in autumn and winter, we quickly leave the optimal range between 40 and 60 % relative humidity due to the regular and necessary exchange of the heated indoor air with colder outside air. This is because cold air can physically absorb less moisture than warmer air. If this outside air now enters a warm room and warms up from, for example, 0 °C to 22 °C, the relative humidity (RH) of this heated air cannot exceed approx. 20 % in the end. This means that in winter, the supply of fresh air inevitably leads to a reduction in the humidity of the indoor air and to leaving the comfort zone of 40-60 %.
For this reason, the German Building Climate Association (FGK) recommends that planners, architects and operators of buildings supplement air conditioning systems with professional air humidification systems to control the humidity and ensure a healthy indoor climate.
Our systems for air humidification in production facilities.
HygroMatik FlexLine
Steam humidifiers
HygroMatik FlexLine
Steam humidifiers
Humidification principle:
Isothermal, temperature remains unchanged during humidification
Water quality:
- Tap water of different qualities
- Demineralised water
- Partially softened water
Installation:
In the ventilation system or directly in the room
Special features:
Special ease of use through touch control
HygroMatik StandardLine
Steam humidifiers
HygroMatik StandardLine
Steam humidifiers
Humidification principle:
Isothermal, temperature remains unchanged during humidification
Water quality:
- Tap water of different qualities
- Demineralised water
- Partially softened water
Installation:
In the ventilation system or directly in the room
Special features:
Compact dimensions
HygroMatik MiniSteam
Steam humidifiers
HygroMatik MiniSteam
Steam humidifiers
Humidification principle:
Isothermal, temperature remains unchanged during humidification
Water quality:
Tap water of different qualities
Installation:
Directly in the room
Special features:
Integrated quiet-running ventilation unit
HygroMatik HPS
High pressure system
HygroMatik HPS
High pressure system
Humidification principle:
Adiabatic, humidifies and cools simultaneously
Water quality:
Fully demineralised water without additives
Installation:
In the ventilation system
Special features:
Special ease of use through touch control
HygroMatik LPS
Low pressure system
HygroMatik LPS
Low pressure system
Humidification principle:
Adiabatic, humidifies and cools simultaneously
Water quality:
Fully demineralised water without additives
Installation:
In the ventilation system
Special features:
Compact dimensions
HygroMatik DDS
Pressurised steam system
HygroMatik DDS
Pressurised steam system
Humidification principle:
Isothermal, temperature remains unchanged during humidification
Feed steam quality:
Black steam or pure steam
Installation:
In the ventilation system
Special features:
Integration into existing pressurised steam network
Get information and advice now.
Ohne angegebene PLZ wird Ihre Anfrage als allgemeine Anfrage an hy@hygromatik.com weitergeleitet.